SHARS 5PCS CAT40 PULL STUD RETENTION KNOB FITS HAAS CAT 40 CNC 43.18% OFF ^[

  • 04

$13.20 (-40%)

3865

  • Custom Bundle: No
  • Brand: Shars Tool
  • Non-Domestic Product: No
  • Item must be returned within: 30 Days
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Condition: New
  • MPN: 202-5925 (5)
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Modified Item: No
  • California Prop 65 Warning: WARNING: This product can expose you to chemicals including nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm.

    • SHARS 5PCS CAT40 PULL STUD RETENTION KNOB FITS HAAS
    TOSHIBA
    CAT 40 CNC NEW + Free Shipping
    Industrial #  PS-532×45
    Welcome to Comparison Testing!
    We don’t sell pull stub, we sell pull stub life!
    Competitors’
    Regular Price: $ 8.80×5=$44.00
    Wholesale price: $25.00, Save: $ 19.00, 43.18% Off
    Founded in 1978, Shars Tool Company has been serving the industrial community and machine shops in the USA for over 30 years.
    We carry high
    quality Pull Stud.
    Product Code
    202-5925 (5PCS)
    Product description
    Taper: CAT 40
    A: 45
    D1 Knob: 0.589″
    D2 Neck: 0.392″
    D3 Hole: N/A
    D4 Pilot:  0.6360″
    L: 2.250″
    L1: 0.988″
    L2 Shou to End: 1.264″
    Knob Socket: RKW40
    Product application
    Product features
    Shars
    tools are manufactured by an
    ISO 9001
    certified manufacturer with 60 plus years of hands-on experience in
    the CNC machining industry. Shars tools manufacturer is also an OEM that produces highest quality European
    brands. The manufacture really pays attention to the details onthe retention knob, as shown here on the flange, the
    straight neck, and the pilot.  Each knob goes through a magnetic particle test after heat treatingto prevent crack line’s
    and after this testing procedure, each knob will be precision ground on all critical contact surfaces, including the pilot
    underneath the flange area.  The pilot will ensure the retention knob body makes a better contact with the tool holder
    next to the threads which will reduce the vibrationand minimize TIR on the overall system (tools holder + retention
    knob).
    Other low price import pull stud are made from
    45 medium carbon steel
    , but
    Shars
    pull stud is made from fine
    alloy steel, 20CrMnTi
    with heat treatment to HRC 56-58
    ,
    which is equal to
    USA material 8620,
    better
    performance than
    45 medium carbon steel
    . The price for 20CrMnTi is double of
    45 medium carbon steel
    .
    After
    the
    forging process, the raw material can
    maintain the mechanical performance and flow line
    .
    This will
    ensure the
    life and stability of the material, after the material
    has been run through several heat treatment processes.
    Using high quality alloy steel 20CrMnTi forging, the material is metallographic dense, uniform and stable.
    After carburizing, the outside of
    material is
    hardened,
    and the inside of material is still soft and has
    enough toughness. Therefore, Material has higher wear resistance and better toughness.
    Other low price import pull stud’s are machined by a turning process, but
    Shars
    pull stud’s are fully ground by
    CNC on all critical surfaces including a pilot
    under the flange of retention knob for full contact between tool
    holder’s taper end and retention knob. Precision grinding pull stubs have higher surface finish
    and dimension
    accuracy
    .
    T
    he fitting accuracy is obviously higher than that of machine pull stubs, effectively reduces the error of
    machine tool and
    cooperation, so as to improve the accuracy and stability of the connection and
    improves the
    precision of the machine tools and lengthens the service life.
    Precision finished on the bottom of the flange to improve fitting with the bottom nose of the taper on the tool
    holder
    For details of the processing quality of ground pull studs surface finish, please see the following picture
    which
    shows the pull stub by half black oxide finish.
    High quality black oxide finish can ensure long pull stub life and a non-rusting surface. The following picture
    shows the pull stub after black oxide finish
    Magnetic particle inspection is used for crack detection to avoid accidents from occurring because of micro defects.
    Retention knobs are magnetic particle tested before left manufacturer. The following picture shows Crack detector.
    Fits on
    Amura-Seiki,
    Fadal
    , comet, Daewoo, Dah Lih,
    Hass
    , Howa Kogyo, Ikegal, Kearny-Trecker, Kia, Kitamura,
    Mitsubishi, Miyano, OKK, Okuma Howa, Roku-Roku, Toshiba, Toyoda, YCI, Sharp
    This pull stud is compatible with the following:
    TJ Davies PS-532 X 45
    Lyndex C40S-4500
    Collis 64712
    We also have retention knob for Fadal, Mazak, Hurco and other mill, please
    visit our Ebay store:
    S
    HARS 6″ 670V Milling Vise +/-0.0004
    6″ wide jaw plate, 7.50″ inner jaw opening, 15.80″ outer jaw opening
    Made from 80,000PSI stress relief cast iron
    Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
    Bed height Tolerance 2.875″ +/-0.0005″
    Clamping repeatability +/-0.0004″
    Lifetime limited warranty
    SHARS 6″ 660U Milling Vise +/-0.0004
    6″ wide jaw plate, 6.25″ inner jaw opening, 15″ outer jaw opening
    Single piece of stationary jaw and vise body to enhance clamping rigidness and accuracy
    Made from 80,000PSI stress relief cast iron
    Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
    Bed height Tolerance 3.189″ +/-0.0005″
    Clamping repeatability +/-0.0004″
    Lifetime limited warranty
    SHARS 6″ 600DS Double Station Milling Vise +/-0.0002
    6″ wide jaw plate
    4.9″ jaw opening in double station, 12″ jaw opening in single station (conversion kit included)
    Unique leadscrew design to allow to clamp either same sized or dissimilar sized parts
    Jaw lift prevention mechanism by eccentric pin design
    Made from 80,000PSI stress relief cast iron
    Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
    Bed height Tolerance 3.25″ +/-0.0005″  (matched bed height at no additional cost)
    Clamping repeatability +/-0.0002″
    Lifetime limited warranty
    All Available to Ship NOW! at Fixed Prices
    SHIPPING: UPS Ground
    Buyer pays
    ACTUAL UPS shipping & insurance, and a $3.00 handling fee
    for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS.
    We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package’s recipient may need to pay these to clear customs.
    PAYMENT:
    We accept : VISA, MasterCard and E-Check on PayPal.com
    Illinois residents add 8% sales tax.
    RETURNS:
    If the item stated as brand new is
    found defective on arrival or incorrect item was shipped, buyer
    understands that the product will be repaired or replaced at seller’s
    discretion, and be given a reasonable amount of time. Buyer is
    responsible for return shipping costs and insurance. Warranties are
    offered by the manufacturer and will be honored by the manufacturer. All
    shipping and handling fees will not be returned in any case.

    Main Menu